102"L x 1-5/8" Dia Weld Steel Crowd Control Barricades

102

Galvanized steel crowd control barricades or fencing are portable, durable, easy to install, protecting pedestrians and guiding drivers through crowded areas.


  • Product No.: CCB-055
  • Price: FOBtianjin USD 15-25/set

Details

102"L x 1-5/8" Dia Weld Steel Crowd Control Barricades

The Crowd Control Barricades is also called steel barrier, steel interlocking barrier, crowd barrier, which is made of galvanized steel, with size 2.0 x 1.1m, 2.2x1.1m, 2.3 x 1.1m, 2.5 x 1.1m, 2.6 x 1.1m. The barricades are linked
together to provide a solid barrier to direct pedestrian traffic. It is easily and quickly installed
between pedestrian traffic and possible danger to provide safety, especially Children.

Powder coated crowd control barrier yellow color drawing

1. Our Crowd Control Barricades is available with the following overall dimensions

 Item

1.0-Meter

2.0-Meter

2.3-Meter

2.5-Meter

2.6-Meter

Length

39" (3.25 Ft.)

79" (6.5 Ft.)

7.5’ (2.3 m)

98" (8 Ft.)

8 ft 6 in (2.6m)

Height

43" (3.6 Ft.)

43" (3.6 Ft.)

43” (109.2 mm)

43" (3.6 Ft.)

43 (109.2mm)

No. of Uprights

6

14

16

18

22

Spacing Between Uprights

4 3/8"

4 3/8"

4 3/8"

4 3/8"

4 3/8"

Frame Thickness

16 gauge

16 gauge

 OD 14-gauge

16 gauge

 OD 14-gauge

Frame Dia.

1.5"

1.5 in. OD 16-gauge or 1/25 in. OD

1.5 in. OD 16-gauge      or 1/25 in. OD

1.5"

1.5 in. OD 16-gauge or 1/25 in. OD

Upright Dia.

.625"

.625"

.625"

.625"

.625"

Other Size of Crowd Control Barricades

1) 6.79' x 2.72' Suits Frame with flexible supporting leg

2) 6.82' x 3.18' Suits Frame with fixed supporting leg

3) 6.82' x 3.44' Suits Frame with Plate base
4) 102"L x 40"H overall size

crowd control barrier welding and galvanized processing

steel barricades size testing

 

2. Main Frame of Crowd Control Barricades

The main frame is made of 1½ ” O.D. galvanized steel tubing, minimum 16 gauge.It is a single tubing
which is bent at right angles.Then the bent tubing is welded in saddle-cut welds with bottom horizontal tubing.

The upright infilled tube is fulled welded onto the frame tube

 

3. Spacing Between Uprights of Crowd Control Barricades

Equally-spaced bars are welded strongly with barrier frame, made of 1.5’’ O.D. steel tubing,
minimum 16 gauge. Minimum of ½” weld at the top and at the bottom of each upright bar. 
The spacing between inside vertical members is no less than 4 3/8’’ and meets all standards.

3. Crowd Control Barricades Base Options

There are several barrier base options available with the bridge base and flat base being the most popular by far.

Feet: Two (2) bolt on flat feet ½” x 2″ flat steel bar with 1¼” O.D. 14 galvanized stem, or 

Two (2) bolt on bridge feet 1½” O.D. galvanized steel, 16 gauge, with ¼” O.D. galvanized stem.

Our barriers go through a hot dip galvanizing process so that our barriers remain rust-free.

 

FLAT BASE, U BASE, Bridge Base, Wheel Base

 
The steel barricades U base and bridge base
 
The steel barricades flat base

 

4. Male-Female Interlocking Ends

 

The crowd control barriers are connected together by interlocking device,called Male-Female interlocking ends.
It is a minimum ⅝” diameter rod welded through main frame at both ends. Male/Female connections
have enough clearance to allow for uneven ground when connected.

The crowd control barriers are connected together by interlocking device

5. Finish of Crowd Control Barricades

The whole panel is hot dipped galvanized after welding as per the specs and drawing. 

The barrier is polished after galvanizing so that no burrs sharp points to hurt the workers.

6. Packing & Loading of Crowd Control Barrier

 
The loading of crowd control barrier

7. Application of Crowd Control Barrier

Parade Routes

Fun Runs/Walks

Event Staging Areas

Concert Stages

Block Parties

Waiting Lines

Grand Openings

Parking Lots

Construction Sites

Carnivals/Fairs

Inquiry

INQUIRY NOW
  •  
  • * (All * must be filled in)

Related Products